| CALORPLAST Heat Exchanger |
| CALORPLAST Heat Exchanger is the most excellent heat exchanger made from heat-resistant Polyethylene and PVDF (Polyvinyl Di-fluoride). Since CALORPLAST in Germany has developed in 1980, CALORPLAST Heat Exchangers have been used in various fields in various industries. |
 Features 
| 1. |
Excellent corrosion resistance. |
| 2. |
Large heat transfer area in small space. |
| 3. |
Made from the same material. |
| 4. |
Space between tubes is constant, and tubes are not worn away with each other. |
| 5. |
Modular construction allows flexible design. |
| 6. |
Low scaling. |
| 7. |
All tubes have high shock-resistant and high thermal-resistant. |
| 8. |
Unique alignment of tubes contributes to high heat transfer coefficient. |
| 9. |
Heat exchanger of PVDF can be operated with steam pressure up to 2.0 bars, and 140 degree Centigrade. |
Applications
Tube Plate type (external circulation type)
Immersion type |
|
Used as heater and cooler for high-purity corrosive liquid at chemical, non-ferrous metal refining, electron, and surface-plating industry. |
|
* |
As Tube Plate Heat Exchanger is made from the same material, it is possible to flow corrosive liquid into both sides (Tube side/ Casing side). |
|
|
| Gas/Liquid type |
|
Used as thermal collector for acid waste gas before neutralization, secondary cooler for incinerator gas, and heater/cooler/thermal collector for corrosive gas. |
|
* |
Able to install washing spray and Mist Eliminator (attachment) for dirty application. |
Inquiry
|
|
